Market area |
| European standard |
Housing type | Model | EC-401A |
Category | Product title | Veiphlox European standard AC charging pile (Sky series) - LED light language model (maximum 32A - plug and play version) |
Product definition | Product type | Wall-mounted charging pile (1-phase) |
Usage | RGB LED lamp post model | |
Function description | Plug and play + LED light language display (RGB light strip) | |
Protective function | Overvoltage protection | Overvoltage protection: single-phase 276V / three-phase 480V, charging stops when it is higher than the overvoltage threshold, and resumes charging when it is lower than the overvoltage threshold. |
Under voltage protection | Under-voltage protection: single-phase 184V, three-phase 320V, charging stops when it is lower than the low-voltage threshold, and resumes when it is higher than the low-voltage threshold. | |
Overcurrent protection | Overcurrent protection: 35A/18A, protect for more than 5S | |
Secondary overcurrent protection: first level, recoverable for limited times | ||
The second level, non-recoverable, stops charging and can only be restored after power failure and restarting. | ||
Ground protection | If there is no grounding, the status light reports failure, and charging cannot be provided. | |
Error/alarm signal | Light prompt + motherboard buzzer sound | |
User functions | User interaction | LED indicator light |
Charging method | Plug and charge | |
Card reader | none | |
Schedule charging | none | |
Structural requirements | Charging connector | European standard AC 7-hole charging connector 32A |
Cable diameter | Meet IEC62196.1&IEC62196.1 certification: CE/CB/TUV/UKCA | |
Mechanical life | No-load plugging and unplugging >10,000 times | |
Emergency button | Hard controlled stop (hidden red reset switch) | |
Shell material | Fireproof PC | |
Protection level | Charger body: IP65/IK10, silicone strip dustproof and waterproof solution | |
Charging connector: IP55 | ||
Connector head tip coupling: IP55 | ||
Screen size | none | |
PCBA | screw fixation | |
Wall mounting | Fix through the back panel bracket and locking screws | |
Charging pile upper and lower covers | Embedded nuts, screw fixation | |
Incoming/outgoing lines | Lower left in, lower right out | |
Logo (swipe card, touch) | none | |
Outer surface treatment | Glossy | |
Parameters | Size | External dimensions 384.82*249.82*124.3mm |
Warranty | 3 years | |
Weight | 7kg | |
Rated voltage | 230V | |
Rated current | 16A/24A/32A | |
Pressure resistance | 2000V 1min | |
Insulation resistance | >5MΩ, 500V DC 1min | |
Charging connector& cable specifications | Charging connector | CE/CB/TUV/UKCA certification, CCS2 |
Connector head specifications | European standard AC 7-hole charging connector 32A | |
Inlet plug type | Hardwired (default) | |
Single phase: VDE three-pin plug (optional) | ||
light meaning | ||
Charging pile status | Ground wire | Light panel(R/G/B) |
Idle | With ground wire | B always on |
No ground wire | B flash slowly | |
Charging | With ground wire | G flash slowly |
No ground wire | G flash | |
Ready to charge |
| G always on |
Reserve | G flash slowly | |
Charging completed, fully charged | G always on | |
Emergency stop | R flash slowly | |
Market area | European standard | |
