Market area |
| Chinese standard |
Housing type | Model | CC-102S |
Category | Product title | Veiphlox China standard three-phase AC charging pile (Galaxy series) - 4.3" LCD screen model (maximum 32A-4.3" LCD-stand-alone version) |
Product definition | Product type | Wall-mounted charging pile (three-phase) |
Usage | Single screen model | |
Function description | Swipe your card to get electricity (you can cancel it yourself and switch to plug and play) + 2 touch buttons (current adjustment, delay setting) + LCD screen displays commonly used data: voltage, current, reservation time, temperature, mileage, etc. (units are European, such as degrees Celsius \ kilometers km) | |
Protective function | Overvoltage protection | Overvoltage protection: three-phase 456V, charging stops when it is higher than the overvoltage threshold, and resumes charging when it is lower than the overvoltage threshold. |
Under voltage protection | Under-voltage protection: three-phase 320V, charging stops when it is lower than the low voltage threshold, and resumes charging when it is higher than the low voltage threshold. | |
Overcurrent protection | Overcurrent protection: 35A/18A for protection over 5SSecondary overcurrent protection: first level, recoverable for a limited number of times;Level 2, non-recoverable, stop charging, and can only be recovered after power failure and restarting. | |
Ground protection | If there is no grounding, the LCD screen displays the cause of the fault or error code, and charging cannot be provided | |
Error/alarm signal | Light language prompt + LCD screen content flashing prompt + motherboard buzzer sound | |
User functions | User interaction | LED indicator + LCD screen |
Charging method | Swipe card to charge or plug and charge + touch button to set delayed charging | |
Card reader | 2 RFID cards, can be copied via mobile phone NFC (ISO 15693, ISO 14443) | |
Schedule charging | Touch version delayed (appointment) | |
Structural requirements | Charging connector | Chinese standard AC 7-hole charging connector 32A |
Cable diameter | Cable 3C certification | |
Mechanical life | No-load plugging and unplugging >10,000 times | |
Emergency button | Hard controlled stop (hidden red reset switch) | |
Shell material | Fireproof PC | |
Protection level | Pile body: IP65/IK10, silicone strip dustproof and waterproof solution;Gun head: IP55Tip coupling: IP55 | |
Screen size | 4.3-inch LCD color screen | |
PCBA | screw fixation | |
Wall mounting | Fix through the back panel bracket and locking screws | |
Charging pile upper and lower covers | Embedded nuts, screw fixation | |
Incoming/outgoing lines | Lower left in, lower right out | |
Logo (swipe card, touch) | Silk screen (card swipe logo + touch logo) | |
Outer surface treatment | Glossy | |
Parameters | Size | External dimensions 355*224*100mm |
Warranty | 3 years | |
Weight | 7kg | |
Rated voltage | 380V | |
Rated current | 8A/10A/13A/16A/22A/32A | |
Pressure resistance | 2000V 1min | |
Insulation resistance | >5MΩ, 500V DC 1min | |
Charging connector& cable specifications | Charging connector head | 3C certification, GB/T 20234 |
Connector head specifications | Chinese standard AC 7-hole charging connector 32A | |
Inlet plug type | Three-phase: IEC 32A 3P+N+E five-pin plug | |
light meaning | ||
Charging pile status | Ground wire | Light panel(R/G/B) |
Idle | With ground wire | B always on |
No ground wire | B flash slowly | |
Charging | With ground wire | G flash slowly |
No ground wire | G flash | |
Ready to charge |
| G always on |
Reserve | G flash slowly | |
Charging completed, fully charged | G always on | |
Emergency stop | R flash slowly | |
