products
HomeProductsUS EV charger Galaxy Series LCD Screen Model

US EV charger Galaxy Series LCD Screen Model

UC102A
Charging Type:SAE J1772 Type1
Model No.:UC-102A
Rated voltage:AC 240V
Rated current:48A/1phase(L1+L2) 48
Rated power:11.5kW
Product features: Card swipe / Plug & play
Product features:3-in-1 EV charger embedded socket, Just replace the corresponding component.
Protection rank:IP65 

1.Safe charging & Durable: UL-certified 25ft premium ev charging cable (105℃) and connector(-30℃~50℃),and ETL approved 14-50 plug for safe home charging. The 48 amp EV charger is built with robust IP65/NEMA 5 waterproof, dustproof and fire resistant protective housing.  whether installed inside or outdoors, giving you peace of mind when charging in all weather conditions.  The charger can be installed indoor or outdoor with a weatherproof NEMA 14-50 plug outlet and J1772 standard connector, includes a cable that stays pliable in very cold weatherand. Over Current, Over/Under Voltage, Surge Protection,Lightning Protection Grounding and Over Temperature Protections. Self-Monitoring and Recovery, Power Outage Recovery.  Built in GFCI.
2.Easy to install and use.   Easy installation on walls or pole s by yourself or a licensed electrician.   Just 5 minutes to install and plug into a pre-existing NEMA 14-50 receptacle.    Save hundreds of dollars on electric vehicle charger installation.  For optimal performance and safety, we recommend installing the level 2 ev charger 48 Amp on a circuit breaker rated at 60A or greater. Please consult a professional electrician for installation.  The cable length of 7.6 meters/25 feet provides flexibility and convenience for charging your vehicle.   The ev car charger is equipped with RGB work indicator lights, which visually display the charging status and enable users to easily monitor the charging progress.   The level 2 charging station supports plug and charge, where users simply need to insert the charging plug into the charging port to initiate charging.
3.High Power and Fast Charging: This 240 Volt Level 2 electric vehicle (EV) charging station charges up to 7-8 times faster than regular 110V outlet level 1 EV chargers, delivering an impressive 30-40 miles of range in just one hour, depending on your EV or plug-in hybrid.   This AC electric car charger is an efficient and rapid home charger, providing an output current of 48A and a maximum power of 11.5KW, which can charge your electric vehicle with high power and efficiency.
4.Universal Compatibility & Installation Recommended:The wall-mounted EV charger is compatible with all J1772 EVs and PHEVs models sold in North America, including Ford, General Motors, Volkswagen, Nissan, Audi, and more. 

Market area

 

SAE J1772 Type1 Standard

Housing type

Model

UC-102A

Category

Product title

Veiphlox SAE J1772 Type1  standard AC charging pile (Galaxy series) - 4.3" LCD screen model (maximum 40A-4.3" LCD-stand-alone version)

Product definition

Product type

Wall-mounted charging pile

Function description

Swipe your card to get electricity (you can cancel it yourself and switch to plug and play)
 + 2 touch buttons (current adjustment, delay setting)
 + LCD screen displays commonly used data: voltage, current, appointment time, temperature, mileage, etc. (units are American, such as Fahrenheit ℉ \ miles mi)

Protective function

Overvoltage protection

Overvoltage protection: 288V, charging stops when it is higher than the overvoltage threshold, and resumes charging when it is lower than the overvoltage threshold.

Under voltage protection

Under-voltage protection: 195 V, stop charging when it is lower than the low voltage threshold, resume charging when it is higher than the low voltage threshold

Overcurrent protection

Secondary overcurrent protection:
The first level has a limited number of recoverable times;
Level 2, non-recoverable, stop charging, and can only be recovered after power failure and restarting.

Ground protection

If there is no grounding, the LCD screen displays the cause of the fault or error code, and charging cannot be provided

Relay sticking

Support relay adhesion detection and alarm;
(It does not affect charging, this function is effective when the grounding is good)

Error/alarm signal

Light language prompt + LCD screen content flashing prompt + motherboard buzzer alarm

User functions

User interaction

LED indicator + LCD screen

Charging method

Swipe card to charge or plug and charge + touch button to set delayed charging

Card reader

2 RFID cards, can be copied via mobile phone NFC (ISO 15693, ISO 14443)

Schedule charging

Touch version delayed (appointment)

Structural requirements

Charging connector

American standard AC 5-hole charging connector 40A

Cable diameter

Passed UL certification

Mechanical  life

No-load plugging and unplugging >10,000 times

Emergency button

Hard controlled stop (hidden red reset switch)

Pile size

External dimensions 355*224*100mm

Shell material

Fireproof PC

Protection level

Pile body: IP65/IK10, silicone strip dustproof and waterproof solution;
Gun head: IP55
Tip coupling: IP55

Screen size

4.3-inch LCD color screen

PCBA

screw fixation

Wall mounting

Fixed by backplane bracket and locking screws

Charging pile upper and lower covers

Embedded nuts, screw fixation

Incoming/outgoing lines

Lower left in, lower right out

Logo (swipe card, touch)

Silk screen (card swipe logo + touch logo)

Outer surface treatment

Glossy

Parameters

Size

External dimensions 355*224*100mm

Warranty

3 years

Weight

15.4 lbs. (7 kg)

Rated voltage

240V

Rated current

16A/24A/32A/40A

Pressure resistance

2000V 1min

Insulation resistance

>5MΩ, 500V DC 1min

Charging connector& cable specifications

Charging connector head

UL certified, SAE J1772

Connector head specifications

SAE J1772 standard AC 5-hole charging connector 40A

Inlet plug type

NEMA14-50 four-pin plug (default);
NEMA6-50 three-pin plug (optional);
Hardwired (optional, >40A must be hardwired)

Gun wire terminal

SC round hole + 1 strip pin (CP)

Tail size

15cm±3

Cable hanging mode

Hanging wire on the top of the shell

Connector hanging mode

The shell has its own muzzle (connector base), and the connector is inserted on the side;

light meaning

Charging pile status

Ground wire

Light panel(R/G/B)

Idle

With ground wire

B always on

No ground wire

B flash slowly

Charging

With ground wire

G flash slowly

No ground wire

G flash

Ready to charge

 

G always on

Reserve

G flash slowly

Charging completed, fully charged

G always on

Emergency stop

R flash slowly


×

Contact Us

captcha