Market area |
| American J1772 Type1 Standard |
Housing type | Model | UC-501 |
Category | Product title | Veiphlox J1772 Type1 American standard AC charging pile (Aurora series) - 1.3" LCD screen stand-alone model (maximum 32A - adjustable stand-alone version) |
Product definition | Product type | Portable charging gun |
Usage | 2 sets of LED lights + touch current adjustment | |
Function description | Plug and play + LED light language display (RGB light bar) + LED (single row of lamp beads, indicating maximum current) + current adjustment touch button | |
Protective function | Overvoltage protection | Overvoltage protection: 288V, charging stops when it is higher than the overvoltage threshold, and resumes charging when it is lower than the overvoltage threshold. |
Under voltage protection | Under-voltage protection: 195 V, stop charging when it is lower than the low voltage threshold, resume charging when it is higher than the low voltage threshold | |
Overcurrent protection | Secondary overcurrent protection: | |
Ground protection | There is no grounding, the status light reports failure, and charging cannot be provided. | |
Relay sticking | Support relay adhesion detection and alarm; | |
Error/alarm signal | Light prompt + motherboard buzzer alarm | |
User functions | User interaction | Two sets of LED indicators (charging status + maximum current display) |
Charging method | Plug and charge + touch button to set maximum current | |
Card reader | none | |
Schedule charging | none | |
Structural requirements | Charging connector | American standard AC 5-hole charging gun 40A |
Cable diameter | Passed UL certification | |
Mechanical life | No-load plugging and unplugging >10,000 times | |
Emergency button | none | |
Pile size | External dimensions 188.5*86*35.2mm | |
Shell material | Fireproof PC | |
Protection level | Pile body: IP65/IK10, silicone strip dustproof and waterproof solution; | |
Screen size | none | |
PCBA | screw fixation | |
Wall mounting | Fix to the wall via the wall mounting hole on the back | |
Charging pile upper and lower covers | Embedded nuts, screw fixation | |
Incoming/outgoing lines | In and out | |
Logo (swipe card, touch) | Silk screen (logo + touch logo) | |
Outer surface treatment | matte | |
Parameters | Size | External dimensions 188.5*86*35.2mm |
Warranty | 3 years | |
Weight | 6.6 lbs. (3 kg) | |
Rated voltage | 110V~240V | |
Rated current | 16A/24A/32A | |
Pressure resistance | 2000V 1min | |
Insulation resistance | >5MΩ, 500V DC 1min | |
Charging connector& cable specifications | Charging connector head | UL certified, SAE J1772 |
Connector head specifications | American standard AC 5-hole charging gun 40A | |
Inlet plug type | NEMA5-15 three-pin plug (level 1, 120V); optional | |
Connector wire terminal | SC round hole + 1 strip pin (CP) | |
Tail size | 15cm±3 | |
Cable hanging mode | None, use portable storage bag | |
Connector hanging mode | None, use portable storage bag | |
light meaning | ||
Charging pile status | Ground wire | Light panel(R/G/B) |
Idle | With ground wire | B always on |
No ground wire | B flash slowly | |
Charging | With ground wire | G flash slowly |
No ground wire | G flash | |
Ready to charge |
| G always on |
Reserve | G flash slowly | |
Charging completed, fully charged | G always on | |
Emergency stop | R flash slowly | |
