Market area |
| IEC62196 Type 2 european standard |
Housing type | Model | EC-102A |
Category | Product title | Veiphlox European standard AC charging pile (Galaxy series) - 4.3" LCD screen model (maximum 32A-4.3" LCD-stand-alone version) |
Product definition | Product type | Wall-mounted charging pile (1-phase) |
Usage | Single screen model | |
Function description | Swipe your card to get electricity (you can cancel it yourself and switch to plug and play) | |
Protective function | Overvoltage protection | Overvoltage protection: single-phase 276V, charging stops when it is higher than the overvoltage threshold, and resumes charging when it is lower than the overvoltage threshold. |
Under voltage protection | Under-voltage protection: single-phase 184V, charging stops when it is lower than the low-voltage threshold, and resumes when it is higher than the low-voltage threshold. | |
Overcurrent protection | Overcurrent protection: 35A/18A for protection over 5S | |
Ground protection | There is no grounding, the LCD screen displays the cause of the fault or error code, and charging cannot be provided | |
Relay sticking | Support relay adhesion detection and alarm; | |
Error/alarm signal | Light language prompt + LCD screen content flashing prompt + motherboard buzzer alarm | |
User functions | User interaction | LED indicator + LCD screen |
Charging method | Swipe card to charge or plug and charge + touch button to set delayed charging | |
Card reader | 2 RFID cards, can be copied via mobile phone NFC (ISO 15693, ISO 14443) | |
Schedule charging | Touch version delayed (appointment) | |
Structural requirements | Charging connector | European standard AC 7-hole charging connector 32A |
Cable diameter | Meet IEC62196.1&IEC62196.1 certification: CE/CB/TUV/UKCA | |
Mechanical life | No-load plugging and unplugging >10,000 times | |
Emergency button | Hard controlled stop (hidden red reset switch) | |
House size | External dimensions 355*224*100mm | |
Shell material | Fireproof PC | |
Protection level | Pile body: IP65/IK10, silicone strip dustproof and waterproof solution; | |
Screen size | 4.3-inch LCD color screen | |
PCBA | screw fixation | |
Wall mounting | Fix through the back panel bracket and locking screws | |
Charging box upper and lower covers | Embedded nuts, screw fixation | |
Incoming/outgoing lines | Lower left in, lower right out | |
Logo (swipe card, touch) | Silk screen (card swipe logo + touch logo) | |
Outer surface treatment | Glossy | |
Parameters | Size | External dimensions 355*224*100mm |
Warranty | 3 years | |
Weight | 7kg | |
Rated voltage | 230V | |
Rated current | 16A/24A/32A | |
Pressure resistance | 2000V 1min | |
Insulation resistance | >5MΩ, 500V DC 1min | |
Charging connector& cable specifications | Charging connector head | CE/CB/TUV/UKCA certification, CCS2 |
Connector head specifications | IEC62196 Type 2 European standard AC 7-hole charging connector 32A | |
Inlet plug type | Hardwired (default) | |
Connector wire terminal | SC round hole + 1 strip pin (CP) | |
Tail size | 15cm±3 | |
Cable hanging mode | Hanging wire on the top of the shell | |
Connector hanging mode | The shell has its own muzzle (gun base), and the gun is inserted on the side; | |
light meaning | ||
Charging pile status | Ground wire | Light panel(R/G/B) |
Idle | With ground wire | B always on |
No ground wire | B flash slowly | |
Charging | With ground wire | G flash slowly |
No ground wire | G flash | |
Ready to charge |
| G always on |
Reserve | G flash slowly | |
Charging completed, fully charged | G always on | |
Emergency stop | R flash slowly |