Market area |
| IEC62196 Type 2 european standard |
Housing type | Model | EC-101S |
Category | Product title | Veiphlox European standard three-phase AC charging pile (Galaxy series) - LED light model (maximum 32A - plug and play version) |
Product definition | Product type | Wall-mounted charging pile (single phase \ three phase) |
Usage | RGB LED lamp post model | |
Function description | Plug and charge | |
Protective function | Overvoltage protection | Overvoltage protection: single-phase 276V / three-phase 480V, charging stops when it is higher than the overvoltage threshold, and resumes charging when it is lower than the overvoltage threshold. |
Under voltage protection | Under-voltage protection: single-phase 184V, three-phase 320V, charging stops when it is lower than the low-voltage threshold, and resumes when it is higher than the low-voltage threshold. | |
Overcurrent protection | Overcurrent protection: 35A/18A for protection over 5S | |
Ground protection | There is no grounding, the status light reports failure, and charging cannot be provided. | |
Relay sticking | Support relay adhesion detection and alarm; | |
Error/alarm signal | Light prompt + motherboard buzzer alarm | |
User functions | User interaction | LED indicator light |
Charging method | Plug and charge | |
Card reader | none | |
Schedule charging | none | |
Structural requirements | Charging connector | European standard AC 7-hole charging connector 32A |
Cable diameter | Meet IEC62196.1&IEC62196.1 certification: CE/CB/TUV/UKCA | |
Mechanical life | No-load plugging and unplugging >10,000 times | |
Emergency button | Hard controlled stop (hidden red reset switch) | |
House size | External dimensions 384.82*249.82*124.3mm | |
Shell material | Fireproof PC | |
Protection level | Pile body: IP65/IK10, silicone strip dustproof and waterproof solution; | |
Screen size | none | |
PCBA | screw fixation | |
Wall mounting | Fix through the back panel bracket and locking screws | |
Charging box upper and lower covers | Embedded nuts, screw fixation | |
Incoming/outgoing lines | Lower left in, lower right out | |
Logo (swipe card, touch) | N/A | |
Outer surface treatment | Glossy | |
Parameters | Size | External dimensions 384.82*249.82*124.3mm |
Warranty | 3 years | |
Weight | 7kg | |
Rated voltage | 230V/400V | |
Rated current | 16A/24A/32A | |
Pressure resistance | 2000V 1min | |
Insulation resistance | >5MΩ, 500V DC 1min | |
Charging connector& cable specifications | Charging connector head | CE/CB/TUV/UKCA certification, CCS2 |
Connector head specifications | IEC62196 Type 2 European standard AC 7-hole charging connector 32A | |
Inlet plug type | Hardwired (default) | |
Connector wire terminal | SC round hole + 1 strip pin (CP) | |
Tail size | 15cm±3 | |
Cable hanging mode | Hanging wire on the top of the shell | |
Connector hanging mode | The shell has its own muzzle (gun base), and the gun is inserted on the side; | |
light meaning | ||
Charging pile status | Ground wire | Light panel(R/G/B) |
Idle | With ground wire | B always on |
No ground wire | B flash slowly | |
Charging | With ground wire | G flash slowly |
No ground wire | G flash | |
Ready to charge |
| G always on |
Reserve | G flash slowly | |
Charging completed, fully charged | G always on | |
Emergency stop | R flash slowly | |
